Need help?Do you have a question about the Ivoclar Vivadent Programat EP 5010 and is the answer not in the manual?
General| Type | Dental furnace |
|---|---|
| Model | Programat EP 5010 |
| Manufacturer | Ivoclar Vivadent |
| Power Supply | AC |
| Frequency | 50/60 Hz |
| Program memory | 500 individual programs |
| Temperature Range | 100 °C to 1200 °C |
| Firing Chamber Temperature | Up to 1200 °C |
| Firing Chamber Dimensions | Ø 90 mm x 80 mm |
Introduction to the Programat EP 5010 furnace and explanation of symbols used.
Key safety principles and general warnings for operating the furnace.
Detailed safety instructions for furnace operation and maintenance.
Specific warnings for heating muffle and instructions for furnace disposal.
General description of the Programat EP 5010 furnace's features.
Detailed technical data including power, fuses, and dimensions.
Specifies acceptable ambient temperature, humidity, and pressure limits.
Procedures for unpacking, checking contents, and assembling the furnace.
Steps for initial power-on, basic settings, and the self-test procedure.
Overview of the control unit, interface, and basic operation.
How to select and switch between firing and pressing modes.
Details on firing program structure, selection, and adjustable parameters.
Information on press program selection and adjustable parameters.
Covers settings, calibration, data backup, software updates, and diagnostics.
Features for image display, MP3 player, video player, and Digital Shade Assistant.
Step-by-step guides for firing with Ivoclar Vivadent and individual programs.
Guides for press procedures using Ivoclar Vivadent, FPF, and individual programs.
Key considerations for effective use of the Infrared Technology.
Regular checks for furnace components and recommended frequencies.
Instructions for cleaning various parts of the furnace.
Step-by-step procedure for replacing the press plunger.
Lists and explains common error messages and technical malfunctions.
Information on authorized repair services and resetting to factory settings.
Information on locating firing and press program tables.
To Next Page
