72
6. Practical Use
Step 2:
Select the operating mode.
After the self-test has been completed, the selection of the operating
modes is displayed. Select the operating mode "Firing".
Step 3:
Select the program.
Press the [Ivoclar Vivadent Programs] button.
Select the desired program group.
Select the desired program.
The operating procedure for the Programat EP 5010 will be explained with the help of two examples: one Ivoclar Vivadent
and one individual program.
6.1 Firing procedure with an Ivoclar Vivadent program
Step 1:
Switch the furnace on.
Switch the furnace on using the mains switch at the back of the
furnace. Subsequently, the furnace conducts an automatic self-test.
Wait until the furnace has reached the set stand-by temperature
and/or the Optical Status Display (OSD) lights up in green.
To Next Page
Loading...
