3
Table of Contents
List of parts 4
1. Introduction / Signs and Symbols 7
1.1 Introduction 7
1.2 Signs and symbols used in these Operating Instructions 7
1.3 Notes regarding the Operating Instructions 7
1.4 Notes on the different voltage versions 8
1.5 Notes on the images in these Operating Instructions 8
2. Safety First 9
2.1 Indications 9
2.2 Health and safety instructions 12
3. Product Description 14
3.1 General 14
3.2 Hazardous areas and safety equipment 14
4. Installation and Initial Start-Up 15
4.1 Unpacking and checking the contents 15
4.2 Selecting the location 15
4.3 Assembly 16
4.4 Removing the furnace head 19
4.5 Initial start-up 19
5. Operation and Configuration 23
5.1 Introduction to the operation 23
5.2 Firing programs and programming options 27
5.3 Press programs and programming options 44
5.4 Advanced functions of the furnace 49
5.5 Multimedia functions 64
5.6 Digital Shade Assistant (DSA) function 68
6. Practical Use 72
6.1 Firing procedure with an Ivoclar Vivadent program 72
6.2 Firing procedure with an individual program 74
6.3 Press procedure with an Ivoclar Vivadent press program 76
6.4 Press procedure by means of FPF – fully automatic press function 77
6.5 Press procedure using an individual press program 79
6.6 Important notes on the use of the Infrared Technology 81
7. Maintenance, Cleaning and Diagnosis 82
7.1 Monitoring and maintenance 82
7.2 Cleaning 83
7.3 Service note 83
7.4 Stand-by 83
7.5 Power-saving mode 83
7.6 Replacing the press plunger 84
8. What If ... 86
8.1 Error messages 86
8.2 Additional error messages 89
8.3 Technical malfunctions 90
8.4 Repair 91
8.5 Resetting to factory settings 91
9. Product Specifications 93
9.1 Delivery form 93
9.2 Technical data 93
9.3 Acceptable operating conditions 94
9.4 Acceptable transportation and storage conditions 94
10. Appendix 95
10.1 Firing program table 95
10.2 Press program table 95
To Next Page
Loading...
