47)The P.W.B.assembly is drawn out forward.
48)The Terminal cover of the Terminal stand assembly is removed.
(Hook two places)
49)The P.W.B. box cover is removed. (Hook one place) And the control
bord unit is removed.
50)The dew cover is removed. (The slide is done right and remove. )
51)Two screws of cover L are removed.
52)Two screws for the evaporator xation (right side) are removed.
53)One screw for the drain pan xation (right side) is removed.
54)The drain pan is detached.
12PHR-N_S530612PHRN.indd 7 2013/8/7 15:42:24
To Next Page
Loading...
