PARTS LIST
SPLIT TYPE
AIR TO AIR HEAT PUMP
CONTENTS
[1] INDOOR UNIT PARTS
[2] Panel opening and shutting
mechanism R Assembly
[3] Panel opening and shutting
mechanism L Assembly
[4] ACCESSORY PARTS
[5] OTHER PARTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with specied ones for maintaining the safety
and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
In the interests of user-safety (Required by safety regulations in some
countries) the set should be restored to its original condition and only
parts identical to those specied should be used.
[6] INDOOR PACKING PARTS
[7] OUTDOOR UNIT PARTS
[8] OTHER PARTS
[9] OUTDOOR PACKING PARTS
■ INDEX
MODEL
12PHR-N
Is the specied power supply voltage used?
Is the connecting cable xed to terminal board rmly?
Is the earth wire connected properly arranged?
Is the drainage properly?
Is the indoor unit hooked to the mounting plate rmly?
Is there any gas leakage at the pipe connection?
To Next Page
Loading...
