IVT 12PHR-N - Disassembly of Outdoor Unit

5-8
12PHR-N
55)Four xed screws of the vertical direction louver stand assembly
removed.
56)Driving motor of the vertical direction louver stand assembly is
removed. (2 screws)
57)The bearing holder is removed. (1 screw)
58)The cross ow fan xation screw is loosened.
59)The two screws for the fan motor cover xation are removed.
60)The cross ow fan is pulled out at the left of the unit and it removes.
61)Fan motor is removed.
[2] DISASSEMBLY OF OUTDOOR UNIT
1) The xed screw of control box cover is removed and control
box cover is removed.
2) The 2 screws on the right-hand side of top plate ass’y is
removed.
12PHR-N_S530612PHRN.indd 8 2013/8/7 15:42:24