11)A bulkhead plate xed 2 screws is removed.
12)The compressor covers 1, 2 removed.
13)A nut is removed and a terminal cover is removed.
14)A lead wire, a thermistor, and a cover gasket are removed.
15)The compressor cover is removed.
16)A thermistor is removed. (1 place)
17)An outdoor fan is removed.
18)The xed 2 screws of a motor angle is removed.
12PHR-N_S530612PHRN.indd 10 2013/8/7 15:42:29
To Next Page
Loading...
