1
During operation, press the PLASMACLUSTER button.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp on the unit will light up.
SELF CLEAN operation will reduce the growth mold fungus with Plasmacluster ions and dry inside of the air conditioner unit.
Utilize the operation at seasonal change over terms.
1
Press the SELF CLEAN button when the unit is not operating.
•
The remote control displays “ ”.
• The blue PLASMACLUSTER lamp on the unit will light up.
• The unit will stop operation after forty minutes.
• The remaining operation time will be indicated on the TEMPERATURE INDICATOR of the indoor unit in minute decrements.
PLASMACLUSTER OPERATION
Plasmacluster ions released into the room are effective against airborne contaminants, such as mold, viruses, and allergens.
SELF CLEAN OPERATION
1
1
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn off.
NOTE:
• Use of the PLASMACLUSTER operation will be memorized, and it
will be activated the next time you turn on the air conditioner.
• To perform the PLASMACLUSTER operation in fan only mode, press
the PLASMACLUSTER button while the unit is not operating. The
mode symbol of the remote control will go off and the fan speed can
not be set AUTO.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp on the unit will turn off.
NOTE:
• You cannot set the temperature, fan speed, air ow direction or timer
setting during the SELF CLEAN operation.
• Mold fungus already grown can not be eliminated by this operation.
12PHR-N_S530612PHRN.indd 4 2013/8/7 15:42:32
To Next Page
Loading...
