GSXP12HRN
5 – 6
18)Disconnect the connector (CN302).
Remove 2 screws fixing the Top duct cover L.
19)Remove 2 screws fixing the top duct.
20)Tilt the Top duct for removing the rib of the Top duct , remove the
unit to the direction of arrow.
21)Remove 2 screws fixing the Top duct cover R. Remove the Top
duct cover R and H-louver ass'y.
22)Remove 6 screws fixing the End plate sub.
H-louver ass'y
TopductcoverR
To Previous Page
Loading...
