17
Use the main menu
HMC300 – 6 720 813 192 (2014/10)
The following table shows how to change the name of the heating circuits.
Set the temperature for a period
▶ Open the menu to adjust a time program for house heating ( page 16).
▶ Turn the menu dial to mark the operating mode for a period.
▶ Press the menu dial to activate the input box for the operating mode.
▶ Turn the menu dial to select a mode (heating or temperature reduction).
The new time period is shown in grey in the time program bar chart.
▶ Press the menu dial.
The control unit works with the new settings.
Copy a time program (e.g. copy the time program for Thursday to Monday and Tuesday)
▶ Open the menu to adjust a time program for house heating ( page 16) and select
the day to be copied, e.g. Thursday.
▶ Turn the menu dial to mark Copy .
▶ Press the menu dial.
A list is shown in the display where you can select to which days the time program is
to be copied.
▶ Turn and press the menu dial to select the weekdays, e.g. Monday and Tuesday.
▶ Turn the menu dial to mark Copy and press the menu dial.
▶ Which time program to copy is shown in a popup window.
▶ Press the menu dial to close the popup window.
The control unit works with the new settings.
Use Result
Table 12 Adjust time program for house heating or individual requirements
6 720 811 136-21.1O
6 720 811 136-22.1O
6 720 811 136-23.1O
To Next Page
Loading...
Need help?
General