INSTRUCTION MANUAL CODE 80416 REV D 12/2023 Page: 40
J.P. SELECTA s.a.u. Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
Process graph that appears on the display
End of cycle
6.3 Sterilization
• Load the trays with the material to be sterilized.
• Press Start/Stop key (5) to start the selected program.
If this operation is made with the door closed, the display will ask to open the door and close it again before pressing the Start/
Stop key.
• The display will indicate the process status every moment.
• At the end, END will appear. Wait for the 0 bar condition.
To Next Page
Loading...
