EasyManua.ls Logo

jablotron JA-14K User Manual

jablotron JA-14K
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
JABLOTRON ALARMS a.s.
Pod Skalkou 4567/33 46601 Jablonec n. Nisou
Czech Republic www.jablotron.com
||
|
JA-14K(R) Security System Control Panel
A control panel is a fundamental part of the JA-10 series alarm system and is designed to protect small,
medium or large premises and it offers a lot of parameters and also the system profiles compliy with security
grade 2 requirements.
The control panel has BUS and/or wireless device (when the control panel is equipped with a radio module)
compatibility. It is recommended that only JA-10 devices are used with the system. Proper functionality cannot
be guaranteed when using third party devices.
Caution: The JA-10 security system can only be installed by a trained technician with a valid certificate issued
by an authorized distributor.
The manual is intended for trained technicians and is valid for control panel firmware LJ60422 and
N-Link configuration software 2.0.0 or higher.

Table of Contents

Other manuals for jablotron JA-14K

Question and Answer IconNeed help?

Do you have a question about the jablotron JA-14K and is the answer not in the manual?

jablotron JA-14K Specifications

General IconGeneral
Brandjablotron
ModelJA-14K
CategorySecurity System
LanguageEnglish

Summary

1 Basic Description and Definitions

1.1 Basic System Configuration Requirements

Basic requirements for system design, installation, and classification for security grade 2.

1.2 Access Codes and Their Default Settings

Defines user access authorization levels and default settings for codes.

1.2.1 Change of Access Codes

Procedure for creating or changing user codes or RFID tags.

1.2.2 Security Access Codes and RFID Devices

Explains code combinations and security levels for user authorization.

1.3 Regular System Check (Maintenance)

Details recommended maintenance and function control for system components.

4 Before System Installation

5 Installation of BUS Devices

5.5 Power Supply Requirements

Details power supply and backup battery requirements for Security Grade 2 compliance.

6 Use of Wireless Devices

6.1 Installation of a JA-111R Radio Module

Provides instructions for installing the JA-111R radio module.

6.2 Installation of Wireless Devices – Enrollment Mode

Describes the enrollment procedure for wireless devices using N-Link software.

8 System Configuration

8.1 The System Profiles

Explains system profiles for pre-setting parameters and complying with security grades.

8.3 Authorisation of Users

8.4 System Optional Parameters (N-Link – Parameters Tab)

8.4.1 Enrolling and Erasing Devices

Procedure for enrolling and erasing devices in the system using N-Link.

8.4.2 List of Applicable Reactions

Lists and describes the system's possible reactions to device activations.

8.4.3 Limitation of False Alarms

Explains methods for limiting false alarms, like confirmed reactions and 3-strikes.

8.5 Types of Alarms

8.6 System Faults

9 System Control Options

9.1 Way of Authorization

Explains authorization methods for controlling the system and verifying user identity.

9.2 System Control by Keypad

Describes how to control the system using a keypad, including setting and unsetting.

9.9 Control by Duress Access Control

Explains the Duress access control feature for silent panic alarms under threat.

9.10 Obstacles Preventing Setting the System

Details obstacles that can prevent system setting and how they are indicated.

10 Setting the System Through N-Link SW

10.1 Starting the N-Link Software and Setting the System Size

Steps to start N-Link software and configure the system size and basic settings.

10.3 Devices Tab

Describes how to enroll and manage devices within the N-Link software.

10.4 Users Tab

Explains how to set up system users and their authorization levels in N-Link.

10.7 Parameters Tab

Used to set various parameters and selectable functions of the control panel.

10.10 Communication Tab

Sets the behaviour of communicators and communication methods.

10.11 ARC Tab

Sets communication parameters for Alarm Receiving Centres (ARCs).

11 Other N-Link Options

11.10 Firmware Update

Guides on updating firmware for control panel and connected devices.

12 Reset of the Control Panel

13 Firmware Updates

13.1 General Firmware Update Rules (FW)

Outlines general rules and procedures for updating firmware.

15 System Takeover by the User

16 Technical Specifications

Related product manuals