jablotron JA-14KR User Manual

JABLOTRON ALARMS a.s.
Pod Skalkou 4567/33 46601 Jablonec n. Nisou
Czech Republic www.jablotron.com
||
|
JA-14K(R) Security System Control Panel
A control panel is a fundamental part of the JA-10 series alarm system and is designed to protect small,
medium or large premises and it offers a lot of parameters and also the system profiles compliy with security
grade 2 requirements.
The control panel has BUS and/or wireless device (when the control panel is equipped with a radio module)
compatibility. It is recommended that only JA-10 devices are used with the system. Proper functionality cannot
be guaranteed when using third party devices.
Caution: The JA-10 security system can only be installed by a trained technician with a valid certificate issued
by an authorized distributor.
The manual is intended for trained technicians and is valid for control panel firmware LJ60422 and
N-Link configuration software 2.0.0 or higher.

jablotron JA-14KR Specifications

General

Number of users	50
Operating environment	Indoor
Security grade	Grade 2
Display	LCD
Backlight	Yes
Battery Life	Up to 24 hours
Type	Control panel
Communication	GSM
Maximum number of wireless zones	14
Event memory capacity	1000 events
Frequency	868 MHz
Operating temperature range	-10°C to +40°C

Summary

Basic Description and Definitions

Basic System Configuration Requirements

Outlines requirements for designing, commissioning, and servicing security systems.

Access Codes and Default Settings

Details authorization requirements using valid codes or RFID tags for system operation.

Change of Access Codes

Procedure for creating or changing user codes or RFID tags by administrators or technicians.

Security Access Codes and RFID Devices

Explains assigning codes and RFID tags to users for system authorization.

Regular System Check (Maintenance)

Covers periodical testing and cleaning of system parts for correct functioning.

The JA-14K(R) Control Panel Utility Parameters

Description of JA-14K(R) Control Panel

Overview of the control panel designed for small/medium systems with wireless communication.

Before System Installation

Installation of BUS Devices

Power Supply Requirements

Details backup battery requirements for security grade 2 compliance.

Use of Wireless Devices

Installation of a JA-111R Radio Module

Provides guidance on placing and connecting the JA-111R radio module.

Installation of Wireless Devices – Enrollment Mode

Switching the System ON

System Configuration

The System Profiles

Allows pre-setting system parameters to comply with norms and security grades.

Control Panel Operation Modes

Authorisation of Users

Explains user roles (Service, Admin, User) and their authority levels.

System Optional Parameters (N-Link – Parameters Tab)

Allows fine-tuning of system behavior and setting of optional parameters.

Enrolling and Erasing Devices

Process for adding and removing devices from the system via N-Link software.

Limitation of False Alarms

Types of Alarms

Details different alarm types (Intrusion, Fire, Panic) and siren outputs (IW/EW).

Intrusion Alarm

System Faults

System Control Options

Way of Authorization

Key factor for system control, verifying user authorization for operations.

System Control by Keypad

Using keypad for system control, status indication, and browsing internal menu.

System Control via Application for Smart Phones

SMS Commands

Controlling the System via N-Link

Control by Duress Access Control

Enables silent panic alarm when threatened, using a special code.

Obstacles Preventing Setting the System

Disabling and Blocking Options

Setting the System Through N-Link SW

Starting the N-Link Software and Setting the System Size

Guide to connecting N-Link, initializing the panel, and setting system size.

Sections Tab

Configures parameters for independently monitored sections (zones).

Devices Tab

Used to enroll devices, set parameters, and view device status.

Users Tab

Establishes new users and sets their rights, access levels, and codes.

PG Outputs Tab

Parameters Tab

Sets system behavior, parameters, and selectable functions.

Diagnostics Tab

Communication Tab

Sets communicator behavior and communication methods (GSM, LAN, PSTN).

JA-190Y Settings

LAN Settings

PSTN Settings (JA-190X)

ARC Tab

Sets communication parameters for alarm receiving centres (ARCs).

Requirements for the Setup of Transmission Paths to an ARC

Transmission Paths

Other N-Link Options

Event History

System Settings

Firmware Update

Updating device firmware via N-Link software.

Reset of the Control Panel

Firmware Updates

General Firmware Update Rules (FW)

Rules for changing firmware on control panels and connected BUS devices.

FW Updates for the Control Panel and Devices Connected to the BUS

Steps for updating firmware on BUS devices and the control panel via N-Link.

FW Updates for Wireless Devices Using a USB Cable

Check After a FW Check

Technical Specifications