A.). To set
the clock, enter:
4 hh mm DD MM YY
where: hh hours
mm minutes
DD day
MM month
YY year
Example:
at 21:30 on April 29, 2007 enter: 4 21 30 29 04 07
If automatic summer time is enabled (
A.), the control panel’s internal clock is
automatically offset by +1 hour on March 31st at midnight. The offset is then
removed on October 31st at midnight to return to winter time.
18. Automatic setting/unsetting schedule
This can be used to program an automatic sequence of daily setting/unsetting
events. Up to 10 daily events can be programmed. The events will occur every
day of the week.
To program an automatic schedule enter: 64 n a hh mm
where: n is the event number from 0 to 9
a is the type of event from 0 to 6 (see the following table)
hh hours (time of event)
mm minutes (time of event)
a
To Next Page
Loading...
