Jabra Elite 75t Titanium Black User Manual

How do I pair my Jabra earbuds with my mobile device?
Jabra Elite 75t - Titanium Black
To pair with your smartphone, tablet, or mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press and hold (1 second) the Left and
Right buttons.
The LEDs on both earbuds will flash green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LED on the right
earbud flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra earbuds from the list. Alternatively, wear the earbuds to hear the
voice guided instructions.
Enter “0000” (four zeros) if you are asked for a pin code.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
To pair with your smartphone, tablet, or mobile device using only the
right earbud, follow these steps.
06/04/2021 01:18
/supportpages/jabra-elite-75t/100-99090000-02/faq/8ec1bcdc-9b43-465e-b2c8-
1faac22ef6f8
Page 1 of 2

Jabra Elite 75t Titanium Black Specifications

General

Type	In-ear
Form Factor	True Wireless
Connectivity	Wireless
Wireless	Yes
Bluetooth	Bluetooth 5.0
Microphone	Yes
Battery Life (Earbuds)	7.5 hours
Battery Life (with Charging Case)	28 hours
Water Resistance	IP55
Weight (each earbud)	5.5 g
Weight (per earbud)	5.5 g
Speaker size	6 mm
Driver Size	6 mm
Microphones	4
Charging Time	2 hours
Fast charging	Yes
Active Noise Cancellation (ANC)	No
Active Noise Cancellation	No
Wireless Charging	No
Frequency Response	20Hz - 20kHz
Quick Charge	15 minutes for 1 hour of playback
Voice Assistant Support	Yes
Compatibility	iOS, Android

Summary

Pairing Jabra Earbuds with Mobile Device

Pairing with Smartphone, Tablet, or Mobile Device (Both Earbuds)

Follow steps to turn on Bluetooth, activate pairing mode on both earbuds, and connect via mobile device settings.

Pairing with Smartphone, Tablet, or Mobile Device (Right Earbud Only)

Steps for pairing using only the right earbud, including turning off the left and activating right earbud pairing mode.