Jabra Elite Active 45e - Black
How do I pair my Jabra Elite Active 45e with my mobile device?
To pair your Jabra Elite Active 45e with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn your earbuds off by pressing and holding (3 seconds)
the the Multi-function button on the right earbud until the LED flashes
red. If you are wearing the earbuds you will hear a power off tone.
3. To enter pairing mode, press and hold (3 seconds) the Multi-function
button until the LED flashes blue and you hear an announcement in
the earbuds.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Elite Active 45e from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
To Next Page
Need help?
General
Weight and Dimensions
