Jabra FREEWAY User Manual

6
ENGLISH
JABRA FREEWAY
PAIRING IT WITH YOUR PHONE/DEVICE
Speakerphones are connected to mobile phones using a procedure
called ‘pairing’. By following a few simple steps, a phone can be
paired with a speakerphone in a matter of seconds.
1 Activate Bluetooth® on your phone/device
2 Turn the Jabra FREEWAY on
3 The rst time you turn the FREEWAY on it will automatically
enter into pairing mode. The Answer/end button will ash
with a blue light and you will be voice guided through the
pairing process. If you have disabled voice guidance go to the
Bluetooth® settings menu on your phone/device and search for
new Bluetooth® devices. Choose Jabra FREEWAY.
4 When pairing is complete you will hear ”Connected”. You are
now ready to start using your Jabra FREEWAY.
NOTE: If asked for a passkey or pin code use 0000 (four zeros)
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra FREEWAY
Jabra FREEWAY
OK
Passkey:
****
HANDSFREE
SELECT
Jabra FREEWAY
added.
The handsfree is
now ready for use
SELECT
PAIR A NEW OR SECOND DEVICE
1 Ensure that the Jabra FREEWAY is turned on
2 Tap the Voice button. You will be asked to ”Say a command”
3 Say ”Pair new device” and follow the instructions
4 If this is your second device you will need to reconnect to the
rst device afterwards

Jabra FREEWAY Specifications

Battery

talk time	14 hours
standby time	40 days

Audio

speakers	3
microphones	2
features	HD Voice, echo and noise cancellation

Weight and Dimensions

length	99 mm
width	120 mm
height	19 mm