AAAHeadsets Installation Note:
How to connect my Jabra PRO 920 with Alcatel Touch 4028, 4038
Prerequisite:
Jabra PRO 920 + Jabra LINK 14201-09
In combination with one of the following phones:
Touch 4028
Touch 4038
Connection:
2-sided end:
Insert the RJ45 plug (red band) into the red socket marked with "AUX" and the RJ10 plug
(blue band) into the blue socket marked with the “phone” symbol of the Jabra PRO 920 base.
2-fold Y-coupling end:
Insert the 3.5 mm audio jack into the headset interface and the RJ12 plug into the bell socket
of the phone. The extra connector socket on the Y-coupling remains free for connection to an
IP phone.
To Next Page
Need help?
General
Weight and Dimensions
