Jack A7 User Manual

第
7
页共 10 页
P39 0~4000 0
Front reinforcement/W seam second stitch speed limit
P40 0~4095 900
The position of the rear half step (presser foot lifted) of the pedal
P41 0~4095 1600
Pedal analog return to the median
P42 0~4095 300
Start position of low speed running in front of pedal (relative median)
P43 0~4095 600
End position of low speed running in front of pedal (relative median)
P44 0~4095 4000
Maximum pedal analog amount
P47 200~360 359
Back-pull function after cutting wire
P48 0/1 0
Lift presser foot switch in advance when cutting wire
P49 100~500 250
Shear velocity
P50 100~500 200
Lifting foot solenoid total output time
P51 0-9999 0
Thin height
P52 10~500 50
Running delay time of presser pin motor
P53 0/1 1
Presser foot switch
P54 0~255 5
Automated test run times
P55 0~255 3
Automatic test stop time
P56 0/1 1
Switch on the power to find needle position automatically
P57 1~60 10
Protection time of solenoid in lifting foot
P58 0~359 275
Stopping needle to adjust the Angle (relative to Z signal)
P59 0~359 160
Lower stop needle to adjust the Angle (relative to upper stop needle)
P60 200~5000 4000
Automatically test running speed
P61 0~1000 500
Electric Angle value
P62 0-3 0
Operation mode (0- normal sewing 1- easy sewing 2-THETA0 test 3- automatic test)
P63 0/1 0
Start tight slot switch
P64 0/1 65
Stop the tight slot switch
P66 0/1 1
safety switch
P67 0~3000 0
Look for the Angle of the principal axis
P68 200~5000 3800
Free seam maximum speed limit
P69 0~359 150
Spindle delta Angle
P71 50~350 104
Soft release time of solenoid in lifting foot
P72 0/1 1
Anti-breaking needle function switch
P74 100~2500 1000
Initial tight seam velocity
P75 0~12 2
Number of initial tight stitches
P76 100~2500 1800
Stop tight seam speed
P77
0~12 2
Stop the number of tight stitches
P78 10~359 130
Clamp starting Angle
P79 0~359 320
Clamp end Angle
P84 200~3000 2000
Pattern sewing speed
P85 0/1 0
Multi - slit pattern switch
P86 0~50 8
Start close stitching distance
P87 0/1 1
The direction of the initial tight seam
P88 0~50 5
Stop close stitching
P89 0/1 1
End the direction of the tight seam
P90 0/1 0
Lock pin distance switch (0-- off 1-- on)

Jack A7 Specifications

General

Brand	Jack
Model	A7
Category	Sewing Machine
Language	English