Jack A7 User Manual

第
8
页共 10 页
P91 0~70 50
Maximum stitch
P97 0~2 0
Voice broadcast mode selection (0-power on language and press on voice 1- power on language
only - press on voice only)
P98 0~7 7
Voice volume
P99 0~2 1
Voice selection (0- Voice off 1- Country 1- Country 2- Country 2)
P100 0~9999 0
Free - seam and multi - seam ABCD segment ten - position compensation
P101 0~9909 0
W seam ABD section ten section compensation
P102 -99~99 2
Reduce/add the number of stitches in the first section of W seam
P103 -99~99 2
Reduce/add the number of stitches at the end of W seam
P104 0~9999 0
Stitch count current value
P105 0~9999 0
Number of pieces counts the current value
P106 1~50 1
A unit for counting the number of stitches
P107 0~9999 9999
Stitch count set point
P108 0~6 0
Stitch count mode
P109 1~50 1
A unit of count
P110 0~9999 9999
Number of pieces count set value
P111 0~6 0
Number of pieces counting mode
4.2 Monitor mode
No. Description No. Description
M01 Feedback value of spindle speed M25 The ratio between motor and machine
M02 On the AD value M26 The total used time(hours) of motor
M03 Thestepzero M27 Software version L
M04 busbar voltage M28 Software version H
M05 The spindle zero M29 Analog input 1
M06 Step encoder value0~4000 M30 Analog input 2
M15 Spindle encoder value0~2880 M40 Analog input 3
M16 Dump switch IO port value M41 Analog input 4
M17 Reverse seam switch IO port value M42
Parameter version
M18 Fill half needle switch IO port value M43
The history records of error codes
M19 IO port value of stitching switch M44
Panel BOOT version number
M20
Servo motor overcurrent fault detection port
value
M45
Motherboard BOOT version number
M21
Stepper motor overcurrent fault detection port
value
M46
Main board APP version number 1 XXYY:XX represents
year and YY represents month
M22 Oil level detects port value M47
Main board APP version 2 XXYY:XX stands for date and YY
stands for time
M23 Initial electric Angle value of spindle motor M48
Version 1 of APP on the panel XXYY:XX represents year
and YY represents month
M24 Mechanical Angle value M49
Panel APP version 2 XXYY:XX represents the date and YY
represents the time

Jack A7 Specifications

General

Brand	Jack
Model	A7
Category	Sewing Machine
Language	English