Jack JK-K4-UT - Sixth, Sewing Machine Adjustment

16 / 51
ҹ澝ড়傪ߑલޅ  Sewing machine adjustment
ࡨ۞͹Одஅ࠲ߑ֘ࣀկԈଭۨы૯зݻબҼ݊࢛ઍߑؘҠ࠲૴Ԉ
եӇ଒ݱҁ
Attention͹In order to prevent the sudden start of the machine which causing a personal
accident, please turn off the power, make sure the motor does stop rotating before
operating!

澝Ӓ԰֘حি֘લޅ 
ߠڐবؔ夊୔܋՟حিߔ௤چલޅО֣ؾتࣀե㝲ববؔ夊୔֣
୓ثЉգ٢މޞՕପଋલ'澝(澝)௤چߛલܸি୏حিߔ௤چ׍Ԇܸি
୏ӗشحিߔ௤چ஑Ѻܸি୏׍Ԇ֣澞
1澝Cooler wire guide adjustment.
Adjust the release needle thread guide hight to the number below then tightening screw
Figure7-1Accounting to different fabric, we can change thread taking up length by
adjusting needle thread guide hight A澝B澝CThread taking up quantity increase when
needle thread guide hight decrease and thread taking up quantity decrease when needle
thread guide hight increase.Figure 1澞
'
(
)
  
