Jackson Labs LC_XO - Gpscon Utility; Installation and Set up; Setting the Options; Communication Parameters

LC_XO GPSDO User Manual
18 © 2012 Jackson Labs Technologies, Inc.
3.3 GPScon Utility
3.3.1 Installation and Set Up
Follow the directions that come with GPSCon for installing the utility on your computer. The
GPSCon utility has a help file that should be consulted in order to get the full functionality of this
utility. Only a few of the features and commands are mentioned in this chapter for convenience.
3.3.1.1 Setting the options
To set up the options for your GPSCon session, press the “Options” button below the display area.
The window shown in Figure 3.7 will appear. You can select from the tabs which options you wish to
set.
Figure 3.7 Options window
3.3.1.2 Communication Parameters
Before you can use GPSCon you must set the communication parameters for your system. Open the
dialog box by pressing the “Options” button. Then select the “Coms” tab. You will see the window
shown in Figure 3.8.