Jacobsen Eclipse 118 - User Manual

Technical Manual
Teknisk manual
When Performance Matters.
™
VARNING
Om denna maskin används på fel sätt kan den orsaka svåra personskador.
De som använder och underhåller denna maskin ska utbildas i hur den
används korrekt, vara varnade för de förekommande riskerna och ska alltid
läsa hela handboken innan någon form av arbete utförs på eller med maskinen.
WARNING
If incorrectly used, this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its
dangers and should read the entire manual before attempting to set up,
operate, adjust or service the machine
SE
Sweden
GB
United
Kingdom
Eclipse
®
InCommand
™
63300 – Eclipse 118, 18” 11 Blade Reel, Gen-Set
63313 – Eclipse 118, 18” 11 Blade Reel, Battery Pack
63327 – Eclipse 118, 18” 15 Blade Reel, Gen-Set
63331 – Eclipse 118, 18” 15 Blade Reel, Battery Pack
63301 – Eclipse 118F, Floating 18” 11 Blade Reel, Gen-Set
63314 – Eclipse 118F, Floating 18” 11 Blade Reel, Battery Pack
63328 – Eclipse 118F, Floating 18” 15 Blade Reel, Gen-Set
63332 – Eclipse 118F, Floating 18” 15 Blade Reel, Battery Pack
63302 – Eclipse 122, 22” 11 Blade Reel, Gen-Set
63311 – Eclipse 122, 22” 11 Blade Reel, Battery Pack
63325 – Eclipse 122, 22” 15 Blade Reel, Gen-Set
63329 – Eclipse 122, 22” 15 Blade Reel, Battery Pack
63303 – Eclipse 122F, Floating 22” 11 Blade Reel, Gen-Set
63312 – Eclipse 122F, Floating 22” 11 Blade Reel, Battery Pack
63326 – Eclipse 122F, Floating 22” 15 Blade Reel, Gen-Set
63330 – Eclipse 122F, Floating 22” 15 Blade Reel, Battery Pack
63304 – Eclipse 126, 26” 7 Blade Reel, Gen-Set
63315 – Eclipse 126, 26” 7 Blade Reel, Battery Pack
4170162-SE-rev.G
63300 – Eclipse 118, 457 mm cylinder med 11 knivar, generatorenhet
63313 – Eclipse 118, 457 mm cylinder med 11 knivar, batteripack
63327 – Eclipse 118, 457 mm cylinder med 15 knivar, generatorenhet
63331 – Eclipse 118, 457 mm cylinder med 15 knivar, batteripack
63301 – Eclipse 118F, flytande 457 mm cylinder med 11 knivar, generatorenhet
63314 – Eclipse 118F, flytande 457 mm cylinder med 11 knivar, batteripack
63328 – Eclipse 118F, flytande 457 mm cylinder med 15 knivar, generatorenhet
63332 – Eclipse 118F, flytande 457 mm cylinder med 15 knivar, batteripack
63302 – Eclipse 122, 559 mm cylinder med 11 knivar, generatorenhet
63311 – Eclipse 122, 559 mm cylinder med 11 knivar, batteripack
63325 – Eclipse 122, 559 mm cylinder med 15 knivar, generatorenhet
63329 – Eclipse 122, 559 mm cylinder med 15 knivar, batteripack
63303 – Eclipse 122F, flytande 559 mm cylinder med 11 knivar, generatorenhet
63312 – Eclipse 122F, flytande 559 mm cylinder med 11 knivar, batteripack
63326 – Eclipse 122F, flytande 559 mm cylinder med 15 knivar, generatorenhet
63330 – Eclipse 122F, flytande 559 mm cylinder med 15 knivar, batteripack
63304 – Eclipse 126, 660 mm cylinder med 7 knivar, generatorenhet
63315 – Eclipse 126, 660 mm cylinder med 7 knivar, batteripack

Jacobsen Eclipse 118 Specifications

General

Brand	Jacobsen
Model	Eclipse 118
Category	Lawn Mower
Language	English

Summary

SAFETY

OPERATING SAFETY

General guidelines for safe operation of the mower, including operator responsibilities and environmental considerations.

IMPORTANT SAFETY NOTES

Defines hazard symbols (DANGER, WARNING, CAUTION, NOTICE) and provides critical safety instructions.

SPECIFICATIONS

PRODUCT IDENTIFICATION

Identifies different mower models by product code and description, including serial number information.

CONTROLS

HANDLE CONTROLS

Describes the function of controls located on the mower handle, like parking brake and speed paddle.

LCD DISPLAY

Details the LCD display functions, alerts, modes, and system information.

FREQUENCY OF CUT

Explains how to adjust FOC using speed and reel settings via charts.

GAS POWER MODULE CONTROLS

Details the controls for the gas power module, including engine switch and choke lever.

BATTERY POWER MODULE CONTROLS

Details the controls for the battery power module, including the battery monitor.

OPERATION

DAILY INSPECTION

Outlines daily checks to perform before operating the mower for safety and function.

INTERLOCK SYSTEM (O.P.C.)

Explains the Operator Presence Control system and how to test its functionality.

OPERATING PROCEDURES

Provides general procedures for operating the mower safely, including hazard awareness.

STARTING;STOPPING

Step-by-step instructions for starting and stopping the mower for both power module types.

MOWING

Describes the procedure for mowing, including patterns, overlaps, and speed considerations.

DAILY MAINTENANCE

Outlines daily maintenance tasks for the mower, including cleaning and lubrication.

ADJUSTMENTS (ALL UNITS)

TORQUE SPECIFICATION

Provides torque values for various fasteners, categorized by standard and metric.

FIXED HEAD REEL ADJUSTMENTS

REEL TO BEDKNIFE (Pre-adjustment Check)

Checks to perform before adjusting the reel to bedknife, including bearings and blade inspection.

FLOATING HEAD REEL ADJUSTMENTS

BEDKNIFE-TO-REEL (Pre-adjustment Check)

Pre-adjustment checks for floating head reel to bedknife, including bearings and blade condition.

BEDKNIFE ADJUSTMENT

How to adjust the bedknife on a floating head reel using adjusters and feeler gauges.

CUTTING HEIGHT

Procedure for setting the cutting height for floating head reels using gauge screws.

BATTERY POWER MODULE

SAFETY

Safety precautions when working with batteries, including acid and hydrogen gas hazards.

BATTERY CHARGER

BATTERY INSTALLATION

REPLACING BATTERY PACK

GEN-SET POWER MODULE

ENGINE

ENGINE OIL

ENGINE SPEED

FUEL

Safe handling, storage procedures, and recommendations for fuel.

MAINTENANCE

BACKLAPPING AND GRINDING

Procedure for backlapping and grinding reel blades for optimal cutting edge.

STORAGE

TROUBLESHOOTING

GENERAL

A chart listing common operational problems and their possible causes and solutions.

MAINTENANCE & LUBRICATION CHARTS

MAINTENANCE CHART

LUBRICATION CHART