Jacobsen ES Series

RJL 100 July 2018
GB
United
Kingdom
Safety, Operation & Maintenance Manual
68021-E410 - AR331, Kubota® D1105-E4B, 3WD
Series ES
WARNING
WARNING: If incorrectly used this machine can cause severe injury. Those who use and maintain this
machine must be trained in its proper use, warned of its dangers and must read the entire manual before
attempting to set up, operate, adjust or service the machine.
679459-GB (rev.r0)

Jacobsen ES Series Specifications

General

Brand	Jacobsen
Model	ES Series
Category	Lawn Mower
Language	English

Summary

Essential Safety Precautions

Safe Operation and Preparation

Rules for safe operation, pre-operation checks, and PPE.

Operational Safety Rules

Guidelines for safe operation, slope limits, and stopping procedures.

Specific Safety Features and Hazards

General Safety Warnings and Notes

Crucial safety notes, including interlock warnings and operator responsibilities.

Controls and Operator Interface

Operator Workstation Overview

Control Panel Interface

Description of buttons, switches, and display elements.

Display Unit Navigation and Settings

Engine Start and System Operation

Primary Driving and Mowing Controls

Throttle lever, traction pedal, mow speed lever.

Warning Indicators and System Diagnostics

Operating the Jacobsen Mower

Daily Inspection and Safety Checks

Essential pre-operation checks for machine safety and condition.

Operator Presence and Interlock System

Testing and understanding the machine's safety interlock system.

General Operation Procedures

Step-by-step guide for operating the mower safely and effectively.

Starting, Driving, and Mowing

Procedures for starting the engine, driving, and mowing grass.

Transporting and Slope Operation

Adjustments for Performance and Maintenance

General Precautions and Traction Control

Cutting Unit and Blade Adjustments

Maintenance and Lubrication Schedule

Maintenance and Lubrication Charts

Overview of service intervals and lubrication points.

Engine Care Procedures

Engine oil, coolant, filters, and belt maintenance.

Hydraulic System Maintenance

Fuel and Air System Maintenance

Blade and Battery Service

Troubleshooting Common Issues

Engine Problem Diagnostics

Identifying and resolving engine starting and performance issues.

Engine Temperature and Exhaust Issues

Diagnosing and resolving overheating and exhaust problems.

Achieving Optimal Quality of Cut

Quality of Cut Problem Solving

Identifying and Correcting Cutting Issues