Jacobsen ES Series

en-102
12 SPECIFICATIONS
12.3 MACHINE SPECIFICATION_____________________________________________
Frame construction: Heavy duty steel chassis with box section frame rails.
Cutter Deck Drive: AR331, Fixed displacement hydraulic motors directly coupled to cutting unit.
Transmission: 3WD Transmission: Hydrostatic closed loop parallel cross series SureTrac system.
Variable displacement piston pump. Front high torque fixed displacement piston wheel
motors. Full time auto 3WD forward and reverse.
Speeds:
Cutting: 0 - 9.5 km/h (0 - 5.9 mph) Forward.
Transport: 0 - 14 km/h (0 - 8.7 mph) Forward.
0 - 6 km/h (0 - 3.7 mph) Reverse.
Steering: Hydrostatic powered steering.
Ground pressure: Dependant upon the tyre pressures and the accessories installed.
Brakes: Hydrostatic braking with wet disc parking brakes on the front wheels.
Battery: 12V, 425 CCA, 45 Amp Hours Capacity, SAE Large Posts.
Mower Lift/Lower: Hydraulic Double Acting Cylinders.
Hydraulic Tank Capacity: 28.4 Litres (6.2 Imp Gallons/7.5 U.S Gallons).