en-92
10 QUALITY OF CUT
NOTE: The Arrow indicates direction of travel.
A streak is a strip of longer grass in the cutting area.
The cause is a damaged blade or you turn quickly
when you mow.
Possible Cause Correction
Damaged blade. Replace the blade.
When you turn suddenly, the cutting units do not cut
all the area.
Make the turns slow and allow the cutting units to cut
the complete area. Change the cut pattern on side
hills.
The tire mats down grass before the cut. Check and adjust the tyre pressure. (Refer to Main-
tenance Section).
Wet grass is compressed before the cut. Mow when grass is dry.