Jacobsen ES Series

en-40
5 CONTROLS
5.2.H.35 WARNING - CAN TIMEOUT ___________________________________________
This screen is shown if there is a communications fault between the
display and the controller.
Stop the machine as soon as possible and contact your service
dealer. Check the armrest and controller harness connections.
Press the button below the to confirm the fault.
5.2.H.36 WARNING - BATTERY FAULT _________________________________________
When this screen is shown, the battery is below 12V for 30 seconds.
Press the button below the
to confirm the fault.
5.2.H.37 WARNING - CONTROLLER I/O FAULT__________________________________
When this screen is shown, there is a Controller I/O fault.
Press the button below the
to confirm the fault.
!
CAN Timeout
9
1
9
1
!
?? Solenoid Fault
(J?-??)
9
1