EasyManuals Logo

Jacobsen LF 3400 Safety & Operation Manual

Jacobsen LF 3400
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
QUALITY OF CUT 5
21
5.3 MARCELLING _____________________________________________________________
NOTE: Arrow indicates direction of travel.
Marcelling, like washboarding, is a cyclical pattern of
varying cutting heights, resulting in a wave-like cut
appearance. In most cases, the wave tip-to-tip distance is
2 in. (5 cm) or less.
Probable Cause Remedy
Mowing (ground) speed is too fast. Reduce mowing (ground) speed.
HOC (height-of-cut) setting is too low for turf
conditions.
Check/adjust HOC to turf conditions.
Cutting reel diameter is worn. Check cutting reel diameter and replace if worn.
TN0220

Other manuals for Jacobsen LF 3400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacobsen LF 3400 and is the answer not in the manual?

Jacobsen LF 3400 Specifications

General IconGeneral
BrandJacobsen
ModelLF 3400
CategoryLawn Mower
LanguageEnglish

Related product manuals