6 CONTROLS
35
6.2.14 4WD SWITCH ____________________________________________________________
The 4WD switch controls the operation of the 4WD traction system. The mower will
automatically switch to 4WD with the PTO switch in the ON position.
Put the switch in the center position for 2WD. When the mower is in motion, do not
engage or disengage the 4WD system.
Press the front part of the switch to engage 4WD in the forward direction.
Press and hold the rear part of the switch to engage 4WD in the reverse direction.
When the switch is released, the mower will disengage 4WD.
6.2.15 CRUISE CONTROL SWITCH________________________________________________
The cruise control switch controls the operation of the cruise control system.
To engage the cruise control, press the traction pedal, push the orange lock forward
and press the front of the switch.
To disengage the cruise control, press the rear part of the cruise control switch, press
the rear part of the parking brake switch or turn the ignition switch to the OFF position.
The cruise control switch must be in the OFF position to start the engine.
6.2.16 THROTTLE LEVER________________________________________________________
The throttle lever controls the engine speed. Always operate the mower at full throttle during
normal operation.
To Next Page
Loading...
Need help?
General
