Jacobsen SLF530 - Display Warning and Service Screens; Display First Screen

CONTROLS 4
en-18
4.2.6.2 WARNING / SERVICE SCREEN _____________________________________________
After the startup screen the warning screen is shown. The warning screen is
visible for three seconds. If there is no input needed, the main screen will
become visible. If a fault condition has occurred during the previous start, a
pop up screen will become visible over the top of the warning screen. The
operator must confirm the fault before they can move to the main screen.
4.2.6.3 FIRST SCREEN __________________________________________________________
This screen shows the position of the interlock switches, the 4WD is not active
and coolant temperature.
The engine temperature gauge is on the right side. The color will be green
with engine temperature below 203° F (95° C). The color will be orange with
the engine temperature between 203° F (95° C) and 220° F (104° C). The
color will be red with the engine temperature above 220° F (104° C).
WARNING
If incorrectly used this maching can cause
severe injury. Those who use and maintain
this machine should be trained in its proper
use, warned of its dangers and should read
the entire operators manual before attempting
to set-up, operate, adjust or service the
machine.
ICONS
1. Parking Brake Engaged
2. 4WD
3. TST Not Installed or not active
4. Cutter Switch Indicator (Indicates mow switch in ON position and mow
speed lever is in MOW position)
5. Foot Pedal Warning (Flashes if not in neutral position on start up)
6. Engine Temperature Indicator (Below bar graph)
7. Time
8. Key in START position
9. Key not in START position
10. Glow Plug Active
11. Back
12. Home
13. Select
14. Menu item to be selected.
1
2
3
10
11
12
13
14
4
5
8
7
6
TST
™
9
TST
™
9:25
A
M 07/0
8/2017
12345.
6
Hours