(a) (b) (c)
What you should have:
Contents of carton:
Tools you will need:
For most installations all you will need are (a) screw-
driver (b) wide mouth pliers and (c) adjustable
wrench.
3
Pump
Base
D.E. Filter
2
2
2
2
2
2
Electrical Data:
Refer to information on motor nameplate for electrical
service data. If the pump on your system is supplied
with a 3-prong twist lock 115V plug, then the appro-
priate female receptacle should be installed. For
systems with a standard 3-prong 115V plug, we
recommend a grounded receptacle be installed with
a built-in ground fault circuit interrupter having a
fused disconnect switch or circuit breaker and wire
size large enough for pump horsepower and distance
from power source. Wiring should be done in accor-
dance with applicable codes by a competent electri-
cian.
Electrical Data
3-prong twist-lock plug Standard 3-prong plug
Grommet Nut
(pump mount)
Bolt (pump mount)