Jacuzzi EN27 Series User Manual

2. Hold the cleaner vertically to drain
(Figure 8).
Figure 8. Keep Cleaner Vertical to Drain Water
3. Unplug power to the cleaner at the control
box (Figure 9).
Figure 9. Unplug
4. Remove the cleaner from the pool and
untangle all kinks and coils in the power cable.
Start at the cleaner head. Lay the cable in the
sun to loosen any tangling memory (Figure 10).
Figure 10. Untangle the power cable
5.2 CLEAN THE FILTER CANISTER
The  lter canister should be cleaned after each cycle.
1. Remove the cleaner from the water and let the
remaining water drain.
2. Unlatch the cleaner cover to access the
canister (Figure 11).
Figure 11. Lift Cleaner Cover
3. Remove the  lter canister (Figure 12).
Figure 12. Remove Filter Canister
5. Empty all debris from the  lter canister, then
rinse the canister and the cleaner using a hose
(Figure 13).
Figure 13. Wash Filter Canister
NOTE: Periodically, deep-clean the filter canister with soapy
water and a soft bristle brush to prevent clogging.
10
ROBOTIC CLEANER

Jacuzzi EN27 Series Specifications

General

Brand	Jacuzzi
Model	EN27 Series
Category	Swimming Pool Cleaners
Language	English