1313
Q The disconnection devices must be installed in the power
supply network according to the installation instructions.
QThe installation of electrical devices and equipment (sockets,
switches, etc.) near the spa must be in compliance with legal
standards and regulations in the country where the spa is in-
stalled.
QFor the equipotential connection as required by specic na-
tional standards, the installer must use the terminal provided
(standard EN 60335.2.60) under the electronic box (
3), and
marked with the symbol . In particular, an equipotential condi-
tion must be established for all metallic masses surrounding the
spa, for example water and gas pipes, metallic platforms, and so
on.
QThe appliance comes equipped with an LED lighting system,
in compliance with Regulation EN 62471:2009.
CAUTION! Before carrying out any maintenance op-
eration, disconnect the appliance from the power
supply line.
To Next Page
Loading...
Need help?
General