Jacuzzi J-375 User Manual

35
J-300
11.4 Programming the Change Filter Timer
A programmable lter timer can be set to remind you when to clean or
replace the lters.
• The default setting is for 180 days.
• The timer range is from OFF to 180 days, in increments of 10 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain clean and working lters, it should be program as
instructed.
A. Programming or resetting the timer.
Note: If no button is pressed within 5 seconds of each selec-
tion the screen will revert back to the Main Menu and the cur-
rent settings will remain active.
1. Press until you get to the “FC” Menu. The display will scroll
“FILTER CHANGE.” After the second scroll, if no action is taken, the
system will revert back to the Main Menu.
2. Press or to prepare the system for changes. Continually press
to adjust the length of time for the timer.
3. Once you select the number of days, press
1
to conrm this
selection. The system will return to the “FILTER CHANGE” Menu.
4. Once the timer expires the display will alternate between the water
temperature and “CHANGE FILTER”, page 52.
11.5 Programming the CLEARRAY Timer
A programmable change bulb timer can be set to remind you when to
when it is time to replace the UV bulb for the CLEARRAY system.
• The default setting is for 365 days.
• The timer range is from OFF to 365 days, in increments of 10 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually have the CLEARRAY system effectively preform its function,
it should be program as instructed.
A. Programming or resetting the timer.
Note: If no button is pressed within 5 seconds of each selec-
tion the screen will revert back to the Main Menu and the cur-
rent settings will remain active.
1. Press until you get to the “UV” Menu. The display will scroll
“CLEARRAY BULB.” After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press or to prepare the system for changes. Continually press
to adjust the length of time for the timer.
3. Once you select the number of days, press
1
to conrm this
selection. The system will return to the “CLEARRAY BULB” Menu.
4. Once the timer expires the display will alternate between the water
temperature and “CHANGE CLEARRAY BULB” page 52.

Jacuzzi J-375 Specifications

General

Circulation Pump	Yes
Diverter Valves	2
Shell Material	Acrylic
Seating Capacity	5-6 Adults
Pump 2	2.5 HP Continuous Duty, 4.8 HP Breakdown Torque
Water Management System	ClearRay Active Oxygen
Heater	4 kW
Cabinet Material	Synthetic
Lighting	LED