63
J-300
Single Service (default setting)
1x16A (J315/J325 Only) This setting will turn the heater off any
time the jets pump is activated.
1x20A This setting will turn the heater off any time either one of
the pumps are activated on two pump models.
1x32A This setting is for all two pump model spas. Both pumps
and the heater will be allowed to operate at the same
time.
Dual Service
2x16A (J315/J325 Only) Both the jets pump and the heater will
be allowed to operate at the same time.
1x16A/1x20A This setting is for all two pump model spas. Both pumps
and the heater will be allowed to operate at the same
time.
Three Phase Service
3x16A This setting is for all two pump model spas. Both pumps
and the heater will be allowed to operate at the same
time.
To Next Page
Loading...
