Page 29
To register your spa you need to have
your spa serial number. The best time
to retrieve the serial number is when the
spa is being connected. You must
register your spa via the internet at
www.Jacuzzi.com.
Follow these steps to register your spa.
1. Using your home computer or other
device, connect to the internet.
2. Go to www.Jacuzzi.com website to register your spa.
3. Click Outdoor Hot Tubs
4. Click For Owners
5. Click Warranty and Manuals
6. Click Warranty Registration
7. Enter your serial number.
8. Once registered you will be given a passcode that will need to be
entered into the control panel (North American models only).
Keep a record of your serial number and passcode for any future
reference. Write that information below.
Serial Number:
Passcode:
After registering your spa online, you can
then enter the registration information into
the control panel.
Note: If a number is entered wrong you can
tap
X
to move backward.
1. From the registration screen, Figure
10.2a, tap
to enter the spa
serial number.
2. Input the 9-digit serial number, Figure
10.2c. Use the letters A, D or R if your
serial number begins with a letter.
3. Tap
to enter the information and
proceed to enter the passcode.
4. Now input the 9-digit passcode, Figure
10.2d, that was provided online when you registered
your spa.
5. Tap