Page 47
A. Temp Lock:
1. Tap
to lock the temperature
feature, Figure 12.7c.
2. Use the scroll wheel
0000
to assign a
4-digit lock and unlock code by sliding
your nger to change the numbers.
3. Tap
to activate the locking feature.
4. The adjust temperature feature is
disabled, but the spa will still perform all scheduled
tasks.
5. Tap to return to the Settings Menu.
B. Spa Lock:
1. Tap
Spa
to lock the spa, Figure 12.7c.
2. Use the scroll wheel
0000
to assign a 4-digit lock and unlock code by
sliding your nger to change the numbers.
3. Tap
to activate the locking feature.
4. All activation and adjustment features are disabled but the spa will
still perform all scheduled tasks.
5. Tap to return to the Settings Menu.
C. Service Lock:
1. Tap
Service
to lock the spa, Figure 12.7c.
2. Use the scroll wheel
0000
to assign a 4-digit lock and unlock code by
sliding your nger to change the numbers.
3. Tap
to activate the locking feature.
4. All spa functions are locked to allow for a temporary service mode for
lter cleaning.
5. Tap to return to the Settings Menu.
6. When you exit this lock mode, a blow out cycle will start, page 43.
Note: This mode has a time out of 2 hours. The spa should not be left
in this lock mode for an extended period. Especially in colder climate or
when freezing conditions exist.
D. To Unlock (Figure 12.7c):
1. Enter the Lock menu. The type of lock that is active will already be
highlighted.
2. Tap
0000
(the rst block) to start entering the code. Then move on
to the next number until the four-digit unlock code has been entered.
3. Tap
to unlock.
4. Tap to exit the menu.
Note: A default passcode can be used in case the original passcode is
lost or forgotten. The code “0772” will unlock the locked setting.
LOCK
0000
set lock level
lockunlock
temp spa service
Figure 12.7c
To Next Page
Loading...
Need help?
General
