32
varying the
hydromassage intensity
friendly mod.
QIt is possible to use just one or both pumps: keep the key of the pump you wish to ad-
just held down and repeatedly press the +” key to begin the adjustment: when satised,
press the "-" key to stop it (once adjustments have been made, the pump-key LED light will
light up and briey ash).
In the instance where just one pump is active, adjustment may be completed without
pressing the relative key beforehand.
1 2
1 2
It is possible to activate another function by holding down the relative key (the availa-
ble functions are those where the keys are lit up).
To switch o the hydromassage hold down the key of the pump in operation (the key
remains on but it is not very bright); in the instance where both pumps are active, switch
one o followed by the other.
"One-touch" Mode: hold down the "on/o" key to switch o all active functions at the
same time.
1 2
1 2 1 2
1 2
Once you have nished using it, before emptying the tub, ALWAYS switch o the hy-
dromassage; also switch o the main switch of the appliance's power supply.
To enrich your wellness-experience, it is possible to add the Cromodream® coloured
light or the water temperature maintenance system to the hydromassage.
Refer to the relative chapters for details on their use.
selecting
additional functions
stopping
the function
("one-touch" mode)
Cromodream®,
water temperature
maintenance system
(where present)
The function lasts approximately 20
minutes; the hydromassage will au-
tomatically stop once this time has
lapsed (it is however possible to turn
it on again by as described previously)
To Next Page
Loading...
Need help?
General
