Jacuzzi J.Touch - Water Temperature Maintenance System (Where Provided)

37
It is only possible to activate the func-
tion if pump 1 is on
With some models, the maintenance
system is automatically deactivated
when pump 2 is activated
The water temperature value is regu-
larly monitored
When the hydromassage stops, the
maintenance system is automatically
disabled.
stopping
the function
Water
temperature
maintenance
system
(where present)
T
his device helps you maintain the tub water temperature at a suitable temperature for
hydromassage.
QHold down the key indicated: the relative light will become brighter and the mainte-
nance system will be activated.
QThe system maximum operation temperature is 40 °C (it is not possible to change this
value, it is only possible to disable the function).
Remember that the longer you use the hydromassage, the lower the water tem-
perature must be (refer to Chapter “Hydromassage - some recommendations”).
QTo turn o the function, press the key displayed (the key brightness will dim).
activate
the function