Installation
Choosing a Location
Place your sauna on a dry and level surface for best results.
Installation requirements for your sauna are as follows:
1. Your Jacuzzi
®
sauna is a self-contained and freestanding unit. It should not be built into any structure without prior
authorization.
2. Please maintain a minimum of 4-inch clearance on all sides of the unit to allow air to circulate while giving access
for the power cord.
Cleaning and Maintenance
1. Before using your sauna for the first time, clean the inside of the sauna with a damp cloth.
2. Place a towel on the floor and bench to absorb any perspiration. Wash these often to maintain a clean and pleasant
environment inside your sauna.
3. Perspiration may darken the wood over time. Refer to Varnish Instructions.
Please be careful when carrying and installing the glass pieces to avoid breakage. Make certain the
glass is securely fastened during installation before letting go of any individual piece that could break.
Jacuzzi
®
Saunas JS-1i and JS-2i
To Next Page
Loading...
Need help?
General
