JADEVER SCALE
SNUG III
1
Ⅰ.Preparation before using
1-1 Cautions before using
◎The site for fixing the scale must be stable and even, and its level adjustment may be
performed by referring to page 4 【Adjustment of leveler】.
◎ The ambient temperature must not exceed 0℃〜40℃, and the condition with too
drastic temperature fluctuation should be avoided.
◎ After starting, the scale must be energized for at least 10 min. before using.
◎ The scale must not be used in a condition with strong wind, vibration, or
electromagnetic interference (for example, near the outlet of cool air, in front of a fan, or
near a heavy-duty machine).
◎ Never impact or drop the scale, or press the scale with something whose weight
exceeds the maximal capacity of the scale.
◎ Never expose the scale to rains or wash the scale with water.
◎ Be careful not to let cockroaches or other pest insects enter the scale.
◎ Be sure to select the suitable transformer whose output is DC 9V / 400ma (please use a
separate power socket and the transformer delivered by the scale manufacturer in order
to avoid interference)
◎ Change the batteries as soon as possible when battery symbol appears; if the scale
uses batteries as its main power supply and the scale will be idle for a long term, the
batteries must be removed to avoid the damage of scale due to the leakage of battery
electrolyte.
※ Application of improper batteries or wrong connection may lead to the failure of system
or other adverse effect.
1-2 Specification and characteristics of products
Model SNUG III-150 SNUG III-300 SNUG III-600 SNUG III-600 SNUG III-3000
Capacity (g) 150 300 600 1500 3000
Resolution (g) 0.005/0.002 0.01/0.005 0.01/0.02 0.05/0.02 0.1/0.05
Display LCD and backlight sheet, 14mm(H)X7mm(W) weight--- 6 digitals
Pan size
(mm)
125 stainless
steel round pan
146×125 stainless steel square pan
Overall size 245×175×147
Power supply 9V DC transformer 50/60Hz, or 2# dry battery*4
To Next Page
Loading...
Need help?
General
