Jadis Orchestra User Manual

Maintenance
Your Jadis amplifier is adjusted for a nominal voltage
corresponding to your country's electrical network.
If the amplifier fails to operate:
1 - Turn OFF the unit immediately.
2 - Unplug all the cables.
3 - Do not forget the mains cord.
4 - Contact your Jadis dealer for diagnostic and repair.
To clean your amplifier, use a soft cloth with a non abrasive
cleaning product.
Do not forget to unplug all connectors before cleaning.

Jadis Orchestra Specifications

General

Type	Integrated Amplifier
Signal to Noise Ratio	90dB
Tube Complement	4 x EL34, 3 x ECC83
Weight	20 kg
Frequency Response	20Hz - 20kHz
Input Impedance	100kΩ
Output Power	40 Watts per channel
Outputs	Speakers
Output Impedance	4 and 8 Ohms
Inputs	4 x RCA (Line Level)