EasyManuals Logo
Home>Jam>Speakers>Double Chill

Jam Double Chill User Manual

Jam Double Chill
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
EN 5
0000
...4s
...2s
0000
Double
Chill
Double
Chill
LED INDICATORS
CHARGING
IN USE
POWER
Red ash every 5 seconds Low battery
Solid red Charging
LED off Charging complete
Flash blue and red Speaker in pairing mode
Blue ash every 5 seconds Paired with device
BASIC FUNCTIONS
POWER
MUSIC
CALLS
Power on/off Long press play/pause button
Disconnect from device Long press play/pause and
X buttons
Play/pause Short press play/pause button
Volume up Short press O button
Volume down Short press X button
Skip forward a track Long press O button
Skip backward a track Long press X button
Pick up a call Short press play/pause button
Decline a call Long press play/pause button
End a call Short press play/pause button
Take a second incoming call Short press play/pause button
Decline a second incoming
call
Long press play/pause button
Move active call to device Long press play/pause button
F – PAIR 2 DOUBLE CHILL SPEAKERS
1. Turn on speaker 1 (press and hold the power
button for 3 seconds).
2. Turn on speaker 2 (press and hold the power
button for 3 seconds).
3. On both speakers, press and hold the “X” and “O”
buttons at the same time for up to 4 seconds, and
wait for a tone and the lights to blink green.
4. The speakers will begin to pair together. This will
take a few seconds.
5. Tone prompt will indicate when speakers are
paired together.
6. Choose “Double Chill” from your device’s
Bluetooth list.
7. Press the “play/pause” button on either speaker
to listen to music. Press “X” and “O” together to
toggle between stereo and mono modes.
8. Once paired, your speakers will recognize each
other every time both are turned on. To disconnect
Pair 2 mode, press and hold the “X” and “O”
buttons for up to 4 seconds. This will enter into
pairing mode again.
Note: If either of your speakers has been previously
paired to a device, or will not pair automatically, press
and hold the “play/pause” and “X” buttons on both
speakers for 5 seconds to activate pairing mode. You
will know they have reached pairing mode by the red
and blue blinking light.
PAIR 2 DOUBLE CHILLS
Enable Pair 2 Long press X and O buttons
simultaneously
Switch between mono and
stereo
Short press X and O buttons
simultaneously
Disconnect Pair 2 Long press X and O buttons
simultaneously

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jam Double Chill and is the answer not in the manual?

Jam Double Chill Specifications

General IconGeneral
BrandJam
ModelDouble Chill
CategorySpeakers
LanguageEnglish

Related product manuals