RAC Plus User’s Manual
4-8
4-9
Chapter 4 — Key Functions & Operating Procedures
To turn off the DPO signal:
Step 1
Press the Menu key, the #5 key then
Enter. The current DPO interval dis-
tance is then displayed in D-1.
Step 2
Press the CLR (clear) key and the DPO
distance is removed.
Step 3
Press the Enter key and D-2 will then
indicate that the DPO signal has been
deactivated.
Step 4
Press Enter to return to the initial menu screen, then press Enter again
to exit the menu function. You are now back in the normal mode with the
DPO signal turned off.
Note: When the RAC is turned off, the DPO distance interval duration resets
to zero (0), thereby deactivating the output. If you turn the RAC off, you
must reset this if you want the DPO to be activated again.
Fig. 4.13 — Current DPO Distance
Fig. 4.14 — DPO Distance Cleared
Fig. 4.15 — DPO Deactivated
To Next Page
Loading...
