RAC Plus User’s Manual
4-10
Menu 6 - Memory Store
Note: This option is only available with the RAC Plus II. It is not available
in the RAC Plus I.
The RAC Plus II has the unique and exclusive capability to store 3500
events in its internal memory. In addition, you are able to manually key
in numeric codes to identify various events, such as intersections, signs,
culverts, bridges, pavement markings, telephone/power poles, pedestals,
etc. The numeric code can be up to four (4) digits in length. This feature
makes the RAC Plus II ideal for road inventories, outside plant inventories,
asset management and engineering.
Step 1
Press the Menu key, then the #6 key.
D-2 then indicates that you are in the
Memory Store function.
Step 2
Press Enter. D-1 displays the last date
that was used in the memory store func-
tion. Note: There is no check to ensure
that a valid date is entered or correct.
If you want to enter a new date, press
the CLR (clear) key, then, using the
numeric keys, enter the date you wish
to use (mm.dd.yy).
Step 3
Once you have keyed in a date, press
Enter. D-2 will then display 'Other'.
At this point, you have the option of
entering a number, up to six digits,
that can be associated with the stored
data. This could be the inventory route
number, an operator identier number,
etc. It is not mandatory to key in a number. If you do not want one, leave
the value set to zero.
Fig. 4.16 — Memory Store
Fig. 4.17 — Enter Date
Fig. 4.18 —
Enter Optional Identier
To Next Page
Loading...
