RAC Plus User’s Manual
4-14
Menu 8 - Memory Erase
Note: This option is only available with the RAC Plus II. It is not available
in the RAC Plus I.
This feature allows you to clear all memory locations that have been stored
in the RAC Plus II. Note that when doing this ALL memory locations are
cleared. You are not able to clear partial memory or selected surveys.
Step 1
Press Menu, the #8 key and then Enter
to access the Memory Erase function.
Erase will be listed in both D-1 and
D-2.
Step 2
Press Enter and D-1 will begin ashing
to alert you that you are about to clear
ALL surveys in memory.
Step 3
Press Enter again and D-1 will change
to Done, indicating that the memory has
been erased.
Step 4
Press Enter to return to the initial menu screen, then press Enter again to
exit the menu function. You are now back in the normal mode.
Note: If at any point prior to Step 3 you change your mind about erasing
the memory, just press the Menu key then Enter. You will be returned to
the normal mode without erasing the memory.
Fig. 4.26 — Memory Erase
Fig. 4.27 —
Memory has been erased
To Next Page
Loading...
