RAC Plus User’s Manual
4-12
4-13
Chapter 4 — Key Functions & Operating Procedures
Menu 7 - Memory Status
Note: This option is only available with the RAC Plus II. It is not available
in the RAC Plus I.
If you are conducting numerous field surveys before downloading the
data to a computer, you may want to check the status of the RAC Plus II's
memory from time to time to make sure you have enough memory left for
a new survey.
Step 1
Press the Menu key, then the #7 key to
access the Memory Status function.
Step 2
Press Enter and the RAC will change
to show the amount of memory remain-
ing and the number of surveys stored.
D-1 shows the percentage of remain-
ing internal memory (i.e. Str 95 means
95% of memory is still available). D-2
shows the number of surveys stored in
memory (i.e. Sur 2 means there are cur-
rently 2 surveys stored in memory.
Step 3
Press Enter to return to the initial menu screen, then press Enter again to
exit the menu function. You are now back in the normal mode.
Fig. 4.24 — Memory Status
Fig. 4.25 — Memory Percentage
and Surveys Stored
To Next Page
Loading...
