Jamr Technology B22 - LCD Display Symbols Explained; Model B22 Key Features

9
Picture-04 Picture-05
3.2. The symbols on the LCD display
1.Mute symbol
2. Systolic blood pressure 3.Unit symbol
4.Diastolic blood pressure 5. Irregular h eartbeat symbol 6. Pulse display
7.Average symbol 8. Memory symbol 9. User A 10. User B
12.Battery low symbol 13. WHO symbol 14. Date/Time display
3.3. Features of Model B22:
1. Talking function 2. Double users: 2 x 120 sets memory 3.Cuff self-checking function
4. Irregular heartbeat checking 5. Average va lue function 6. Low battery display
7. WHO function 8. Auto power-off 9. External power adapter support
10.Volume adjustment 11. Date/time display
Note: Arm circumference should be measured with a measuring tape in the middle of the
relaxed upper arm. Do not force cuff connection into the op ening. Make sure the cuff
connection is not pushed into the AC adapter port.
4. Using your Monitor for the First Time
4.1. System Settings
After you load th e battery or connect power for the monitor, p ress the SET button and hold it
for more than 3 seconds, and then you can start to set:
Setting the User:
Press the me mory button to select User A or User B. When display A (/B) on the screen, press
the memory button to switch to user B (/A). Pressure the SET button to confirm.
Setting the Year:
Initial year is 2018, when the year display is flashing, press the memory button, the year w ill
increase by I year e ach, hold the memory button and it will increase co ntinuously 1 by 1 , until
2049, and then rollover to 2018, once the year Setting is OK, press SET button to confirm.
Setting Month/Date:
Initial Month/Date is 1/01, when the Month display is flashing, press the memory button, the
month will increase by 1, press SET button to confirm, and do in the same way to set the date.
Press SET button to confirm.
Setting Time :
When the hour display is flashing, press the memory button, the hour will increase by 1, press
SET button to confirm, a nd do in the same way to set the minute. Press SET button to confirm.
Setting Volume:
When display with SP is flashing, press memory button to switch volume 1, volume 2, volume
3 or OFF. Press SET button to confirm.