11
12. Programmed Commands List
13. Advanced Settings
The explosion proof phone allows you to program and to change setting by local keypad or by phone calls.
Note: Factory default password is 9999.
Here is the programming instruction for phone:
Off-hook (or making a phone call and get answered)
Press *# to enter programming mode (you will hear two beeps when entered programming mode )
Press 9999 followed by # (you will hear two beeps when password is correct, and failure with silence)
Press a program parameter
Press a program data followed by # (you will hear two beeps when programming is succeed, and failure with silence)
Note: Please make sure the telephone line is connected before programming.
Here is the SMS command format:
*#Password#Program ParameterData #
Reset to factory settings
99 is the program parameter to reset to factory settings, the whole string is: *#9999#99#
Change Password
E.g. Change the password to 1235, 00 is the program parameter to change password, the whole string is: *#9999#001235#
Program the First speed dial number
(3 - 16 digits)
Program the Ninth speed dial number
(3 - 16 digits)
Program the Second speed dial number
(3 - 16 digits)
Program the Tenth speed dial number
(3 - 16 digits)
Program the Third speed dial number
(3 - 16 digits)
Talk time limit (Default 0)
Can be set to 0~255 minutes, 0= no limit
Program the Fourth speed dial number
(3 - 16 digits)
Flash off function (X=1-9 levels. 1=100ms, 2=200ms,
3=300ms, 4=400ms, 5=500ms, 6=600ms, 7=700ms,
8=800ms, 9=900ms. Default value is 6.)
Program the Fifth speed dial number
(3 - 16 digits)
Hold time for speed dial
(The holding time can be 1~9 seconds, default is 3
seconds)
Program the Sixth speed dial number
(3 - 16 digits)
Program the Seventh speed dial number
(3 - 16 digits)
Change Password (9999 is the default password)
Program the Eighth speed dial number
(3 - 16 digits)
To Next Page
Loading...
Need help?
General