- 28 -
JW-H61M-L3 User's Manual
4.5.6 Boot
• Full Screen Logo
Setting switch of all-screen Logo, optional for Disabled
，
Enabled.
• Fast Boot
Setting initialization minimum equipment for boot, optional for Disabled
，
Enabled.
• Option ROM Messages
Optional for Force BIOS
，
Keep Current.
• Interrupt 19 Capture
Optional for Disabled
，
Enabled
.
• Boot Option #1
Setting the system boot sequence
，
optional for the booted equipments adn Disable.
Press < ESC> key to return to the Boot menu
Aptio Setup Utility - Copyright (C) 2011 American Megatrends,Inc.
Main Advanced Chipset Boot Security JUSTw00T! Save & Exit
Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Full Screen Logo
Fast Boot
Option ROM Messages
Interrupt 19 Capture
Boot Option Priorities
Boot Option #1
Hard Drive BBS Priorities
1
[On]
[Enabled]
[Disabled]
[Force BIOS]
[Enabled]
[SATA: Hitach...]
Number of seconds to wait for
setup activation key.
65535(0xFFFF) means indefinite
waiting.
→ ←
: Select Screen
↑↓
:
Select Item
Enter: Select
+/-: Change Opt.
.......
ESC: Exit
Version 2.11.1210. (C)Copyright 2011 American Megatrends, Inc.
Setup Prompt Timeout
This option sets how long the prompt message of setup is.
Bootup NumLock State
It is used to set state of Numlock, after system starts up. When On is chosen, Numlock will
be opened and number keys on the keypad are available, after system starts up; when off is
chosen, Numlock will be closed, after system starts up.
• Chane Settings
Setting IRQ for serial port
，
optional for Auto and specied value .
• Serial Port
Setting switch of serial port, optional for Disabled
，
Enabled.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends,Inc.
Chipset
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
[Enabled]
IO=3F8h; IRQ=4;
[Auto]
Enable or Disable Serial
Port (COM)
→ ←
: Select Screen
...
ESC: Exit
Version 2.11.1210. (C)Copyright 2011 American Megatrends, Inc.
To Next Page
Loading...
Need help?
General
